Used for on-line detection of material density and concentration in industrial production process, suitable for metallurgy, mining, papermaking, chemical, food and other industries.
1. Non-contact measurement method, the detector is installed outside the industrial pipeline or equipment, it is not affected by the harsh conditions of material viscosity, corrosion,high temperature, high pressure, abrasion, etc., long-term operation is stable, reliable and durable.
2. There are few interference factors to the measurement result, the speed and temperature of the material have no influence on the density or concentration measurement.
3. The use of high-sensitivity and high-efficiency scintillation detectors greatly reduces the intensity of the required radioactive source, so that the radiation safety of the instrument is reliably guaranteed.
4. Developed a new type of automatic peak stabilization technology, which can automatically compensate for instrument drift caused by temperature changes or component aging, so that the long-term stability and repeatability of the ray count rate is less than 0.1%.
5. It adopts a constant-amplitude pulse counting rate transmission method with an amplitude of up to 15 volts, which has a high degree of anti-interference performance and the transmission distance can reach 1000m.
1. Using the principle of γ-ray absorption, non-contact detection of materials can also be used to indirectly determine the concentration and content of a certain component in the material liquid and the ratio of two materials through the density.
2. It is suitable for the detection and control of material concentration in the operation of slurry transportation.
3. Anti-interference: not affected by particle size,temperature,flow rate and abrasion; range: 0-.
4. Measurement range: 0%~75% (adjustable according to the actual process on site).
1.Measurement range: Concentration 0~75%.
2.Application pipe diameter(Liquid layer thickness)：Ф80~500mm.
3.Measurement accuracy: ±0.1%-1% of the range(depending on site condition and the size of the range).
4.Working environment :temperature: 0℃～+50℃,relative humidity: ≤90%,no-condensing.
5.Working environment of detector: Temperature: -20℃～+50℃,relavite humidity: ≤95%,no-condensing.
Application industry: suitable for metallurgy, mining, papermaking, chemical, food and other industries.
Application solution: It is suitable for the detection and control of the material concentration in the slurry transportation operation, it is used for the online detection of the material density and concentration in the industrial production process.